Product Description

Manhole Mortar Spray Rig comes in two styles either a Goose Neck or Bumper Pull. Trailers range from 12000lbs dual axle to 14000lbs dual axle. Goose Neck is self contained to all equipment and working materials and bumper pull requires the cement to be loaded on the truck bed to second transport vehicle. These are steel framed units DOT approved with heavy duty center supports 18” on center. Steel plate flooring with fabricated work deck for the mixer. Trailers are also equipped with electric brakes per axle. Trailers and/or long flatbed trucks can be custom tailored for any application. See attached photos and equipment list included with rig.

image of rigStandard Equipment List
Items can be added or deleted as needed

20’ Goose Neck 14000lbs Steel Trailer
Or Bumper Pull 12000lbs Steel Trailer
Putzmeister H.O. Pump S5GH
6-9 Cubic Foot Mortar Mixer
25’ Grout Hose
Spray Nozzle
250-325 Gallon Water Tank
3500 PSI Pressure Washer
100’ Hose Reel
5000 Watt Generator

image of goose neck trailerNone Standard Equipment List
Items can be added or deleted as needed

Air Blower Gas or Electric
Tripod and Safety Harness
Gas Monitor
Electric Paddle Mixer

Replacement Parts

Most replacement parts are stocked and/or
can be ordered in less than a week. We advise
to keep on hand a back up for most of the
equipment or replacement parts to avoid down
time in the field.


Training Course Overview

The trainee will be shown how to operate, maintain, apply repair coatings, and repair sewer structures such as manholes, lift stations, and other various sewer structures.

Training shall include 40 hours of the following:

  1. How to prepare and clean the surface prior to applying coatings
  2. Identifying needed repairs and how to fix them
  3. How to operate equipment: Mortar mixer, mortar pump, spray nozzle
  4. How to maintain all equipment
  5. How to property mix materials to correct design
  6. Confined space and Safety training course is offer in addition if the applicator does not already have a certification.

Applicator training can be done by actual hands on field training provide that proper insurance requirements are met, field observation, and/or at any facility we can demonstrate all the field functions. Applicator will be given all equipment technical manuals and maintenance procedures. Applicator will be given a full parts list with cost for replacement. Applicator will also be given a certificate of completion once they have completed the 40 hour course and are able to demonstrate the ability reproduce the correct procedures in a successful application of these products. For more information please contact Eric Dupre’ Training and technical Coordinator.

Become an Applicator